Hioki MR8904, Instruction Manual

Page: 21 / 72

3.3 Connecting the Unit to a PC
17
PC Requirements: A personal computer running Windows XP, Vista, 7 or 8.
The first time you connect the Memory HiCorder and PC, perform the following procedure to enable the
PC to recognize the Memory HiCorder.
For Windows Vista/7/8
The Memory HiCorder is recognized automatically, and the preparation to use the device completes.
For Windows XP
Connecting the Memory HiCorder and PC
• To prevent a malfunction, do not disconnect the USB cable during communication.
• The Memory HiCorder and PC should be connected to the same earth ground. If
grounded separately, potential difference between the ground points can cause malfunc-
tions or damage when connecting the USB cable.
USB cable
MR8875
1
Connect one end of the USB cable to the
USB cable slot on the Memory HiCorder
while making sure the plug is oriented
correctly.
2
Connect the other end of the cable to a
USB port on the PC.
A [Found New Hardware Wizard] dialog
box will appear and the new hardware de-
tection wizard will begin.
1
Check
[No, not this time]
and
click
[Next]
.
2 Click
1 Check