Hioki MR8880-20 Instruction Manual Download Page 57

Page: 57 / 300

2.7 Using CF Card or USB Flash Drive (for Saving Data)

Chapter 2 M

eas
ureme

t Prep

ions

CF Card Insertion & Removal

Eject Button

Inserting a CF card

Open the CF card slot cover.

Press the Eject button in if it is in the
released position.

Face the CF card with the arrow mark
on top (

), and insert it in the direc-

tion of the arrow all the way in the slot.

Removing a CF card

Open the CF card slot cover.

Press the Eject button (to release it).

Press the Eject button again and pull
the card out.

Cover

Right side of
instrument

USB Flash Drive Insertion & Removal

The USB flash drive may not be recognized by the instrument depend-
ing on the USB flash drive used.

Inserting a USB flash drive

Confirm the orientation of the connection
parts of the USB flash drive and USB flash
drive port, and then insert the USB flash
drive all the way in.

Removing a USB flash drive

Pull the USB flash drive out.

See:

"Replacing CF Card or USB Flash Drive dur-
ing Saving ([Realtime] only)" (p. 106)

Summary of Contents for MR8880-20













































































































































































































































































































Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands

Hioki MR8880-20, Instruction Manual

Search results

Summary of Contents for MR8880-20

Reviews:

Brands by name

Popular brands