manualshive.com logo in svg

Hioki MR8880-20, Instruction Manual

Share
Download
Hioki MR8880-20 Instruction Manual Download Page 54

2.5  Attaching the Carrying Strap

44

Use the strap to avoid dropping the instrument while carrying, or when you need to 
hang it on a hook.
 

2.5

Attaching the Carrying Strap

Attach the strap securely to the strap holes in two places on the protec-
tor. If the strap is not sufficiently secure, the instrument may drop while 
being carried, resulting in damage.

Strap Hole

2

Feed the strap 
through the buckle.

Put the end of the 
strap under the 
retaining loop.

3

Push the strap through one of the 
strap holes on the instrument.

Repeat the same 
procedure with the 
other end of the 
strap and the other 
strap hole.

1

4

Feed the strap through 
the buckle so that it is 
tight and not twisted.

When only instrument

When printer attached

Strap Hole on Printer

Summary of Contents for MR8880-20













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands