Hioki MR8880-20, Instruction Manual

Page: 33 / 300

1.2 Names and Functions of Parts
23
1
Cha
p
te
r 1
Overview
Operating Keys and LED
LED
„ POWER
Lights when the power is turned on (p. 45).
„ CHARGE
Lights when the Z1000 Battery Pack is
charging (p. 36).
Start and stop measurement (p. 58)
Setup and display
„ PRESETS
Allows you to set measurement
conditions by following instructions
on the screen.
„ ESC
Cancels changes to settings.
„ (Cursor Keys)
Moves the position of the
cursor (blinking selec-
tion) on the screen.
„ ENTER
Accepts displayed
settings.
„ KEY LOCK
To lock the keys, press
and hold the left and right
cursor keys for three
seconds. Repeat to unlock (p. 62).
„ START
Start measurement. The LED at the right lights
green while measuring.
„ STOP
Stop measurement.
Saving operations
Press to save data man-
ually
View input state
„ MONITOR
Displays the current input state as a waveform or numer-
ical values. (The data is not recorded in internal buffer
memory.)
Scroll waveforms and read cursor values
„ SCROLL/CURSOR
Selects the application for the left and right scroll keys
(waveform scrolling or cursor A/B movement).
„ (left/ right keys)
Scrolls the waveform or moves cursors A and B
(p. 132).
Choose a screen
„ WAVE
Switches the waveform screen display (p. 25).
„ SET
Displays the Settings screens, and switches
among the screen tabs with each press (p. 26).
„ FILE
Displays file information (p. 160).