Hioki MR8880-20, Instruction Manual

Page: 158 / 300

6.1 Saving & Loading Data
148
*1: Save waveform data in binary format if you intend to view it later in the HiCorder or on a PC with
the supplied program. Waveform data and some measurement-related settings data are saved.
To save a waveform partially, specify a period by using A/B cursors before saving (p. 140).
*2: When opening a CSV file in a spreadsheet program, note that the number of rows that can be
loaded at one time is limited (p. A12).
*3: BMP Format: This is a standard Windows
®
graphics format. These files can be handled by many
graphics programs.
*4: Date (YY-MM-DD) folders are automatically created inside the DATA folder.
*5: When saved manually. See "Appendix 3 File Naming" (p. A12) for file naming details.
*6: The TXT file extension is applied except when [Separator:Comma] is selected on the [System]
screen.
About File Types & Saving/Loading
z
: Available/ X: Not Available
File Type
File
Format
Folder Name
File Name*5
(Auto-numbered
from 1)
Save Load
Au
to
Man
ual
MR
8880
-2
0
PC
Setting
Conditions
Binary
CONFIG
CONF0001.SET
X
z z
X
(Setting list) Binary
CONFIG
LIST0001.BDL
X z z X
(Schedule
Settings)
Binary CONFIG LIST0001.RSV
X z z X
Waveform
Data
∗
1
Binary
DATA\(date)
∗
4
(e.g.:10-12-10)
WAVE0001.MEM
WAVE0001.REC
z z z z
Text
(CSV)
∗
2
DATA\(date)
∗
4
(e.g.: 10-12-10)
WAVE0001.CSV
∗
6
z z
X
z
Numerical
Calculation
Results
Text
∗
2 MEASUREMENT MEAS0001.CSV
z z X z
Captured
Screen Image
BMP
∗
3
PICTURE
SCR00001.BMP
X z z z
Up to 1,000 files can be stored in one folder. Also, as more files are created,
more time is needed to start and stop recording.
We recommend setting measurement conditions so that the number of files
saved stays as low as possible. (For example, adjust the recording time so that
the size of one file does not become too small.)
When the number of files saved in one folder exceeds 1000, a new folder will
automatically be created and files continued to be saved in the new folder (ex-
cept for real time saving).