manualshive.com logo in svg

Hioki MR8880-20, Instruction Manual

Share
Download
Hioki MR8880-20 Instruction Manual Download Page 138

4.10  Entering Comments and Titles

128

Comments of up to 40 characters can be entered as a title for the measure-
ment data, and as a label for each input waveform. 
Titles and comments are displayed on the waveform screen.

They are also printed when the data is printed with an optional printer (p. 171). Com-
ments can also be displayed when the data is viewed using software on a computer.

The title comment and comment for each channel can be set on the following 
screen.
Title comment: 

[Setting]/[Comment] 

screens

Comment for each channel:

 [CH]/[Comment] 

screens

4.10

Entering Comments and Titles

Setting the Title and Comments

Select the field to enter 
the comment.

1

2

The character entry screen 
appears.

3

Select the characters to 
enter.

To enter a space, select a 
blank character.

Apply
The selected character

 

appears in the entry field.

Entry field

Navigate the entry field

Finished with entry

Apply

Operating Panel (p. 129)

Select the 

[CH]

 screen.

Summary of Contents for MR8880-20













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands