Hioki MR8827 Instruction Manual Download Page 112

Page: 112 / 436

107

Printing (When Model U8350

Printer Unit is installed)

The

[Printer]

sheet lets you set the print method and detailed printer options.

To Open the

[Printer]

Sheet

Press this key repeatedly to

display the various sheets.

Operations available from the [Printer] sheet

To select the print method

Refer to “6.1 Print Type and Workflow” (p. 108).

•

Auto-print (p. 109)

•

Manual Print (p. 112)

Refer to “6.6.1 Screen Hard Copy” (p. 118).

Refer to “6.6.2 Report Print (A4 Size Print)” (p. 118).

Refer to “6.6.3 List Print” (p. 119).

Refer to “6.6.4 Text Comment Printing” (p. 119).

Printer settings

•

Print Speed (p. 115)

•

Grid Type (p. 115)

•

Channel Marker Type (p. 115)

•

List (p. 116)

•

Gauge (p. 116)

•

Printer Density (p. 115)

•

Horizontal axis (Time axis) Zoom (Mag/Comp)

(p. 116)

•

Upper/Lower Limit Print (p. 117)

•

Zero Position Comment Print (p. 117)

•

Print Counter (p. 117)

•

As much as possible, avoid printing in hot and humid environments. Otherwise, printer life may be

severely shortened.

•

When solid (100% black) printing is continued for a long time, the print head may become hot,

resulting in smeared printing. In such a case, stop printing for a while until the print head cools.

Printing (When Model U8350 Printer Unit is installed)

[Environment] [Init]

[File Save]

[Printer]

[Interface]

Printing (

When Model U8350 Printer Unit is installed

)

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands