Hioki MR8827 Instruction Manual Download Page 102

Page: 102 / 436

Manage Files

5.5 Manage Files

Press the

FILE

key to display the File screen. Data saved to storage media can be managed on the File

screen.

Use the

CURSOR

keys to select a file from the file list.

Before performing an operation, insert the storage media (except for the optional built-in drive). When

no storage media is inserted,

[NO FILE]

appears in the file list of the File screen.

List of File Operations

Operation

key

Function

indication (GUI)

Description

Reference

page

CH.SET

Media Change

Change storage media.

(p. 78)

Save

Select channels and save settings data and waveform data as files.

(p. 98)

Sort

Sort the files in the file list in the selected order.

(p. 102)

Open Folder

Open the selected folder.

(p. 100)

Load

Load settings data or waveform data from a file.

(p. 93)

Copy

Copy a file to a specified folder. If selected item is a folder, move to

that folder.

(p. 104)

New Folder

Create a new folder.

(p. 100)

Rename

Change a file or folder name.

(p. 103)

Delete

Delete a file or folder.

(p. 101)

Format

Format selected storage media.

(p. 42)

Switch the operations assigned to the

keys (GUI).

Save/Load Data and Manage Files

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands