Hioki MR8740, Instruction Manual

Page: 380 / 424

18.2 Initializing the Instrument
368
Select groups of settings currently in force on the instrument, and initialize the settings. Initialization returns
the instrument to the factory default state. By default, the setting of [Setting (Stat, Ch, Trig)] and [Setting
(Env)] are selected for initialization in this screen.
Discard the waveform data saved in memory and initialize the data.
18.2
Initializing the Instrument
18.2.1 Initializing System Settings (System Reset)
1
2
3
Procedure
To open the screen: Right-click and select [SYSTEM]
→
[Init] sheet
1
Move the flashing cursor to the item you want to initialize.
2
Select [On]
.
Select [Off] for the groups of settings that you do not want to initial-
ize.
3
Move the flashing cursor to the
[
System Reset
] .
4
Select [Exec]
.
A confirmation dialog box appears.
5
Select [Yes].
To cancel initializing:
Select [No]
.
Initialization is complete when "System initialized" appears.
(Status, Ch, Trig-
ger) Current settings in Status screen, Channel screen,
and Trigger setting window (Default setting: On)
(Environment) Current settings in the Environment sheet and File
Save sheet (Default setting: On)
(Interface) Current settings in the Interface sheet (Default setting:
Off)
18.2.2 Initializing Waveform Data
Procedure
To open the screen: Right-click and select [SYSTEM]
→
[Init] sheet
1
Move the flashing cursor to the [Clear Wave Data]
.
2
Select
[Exec].
Initialization is complete when "Waveform data erased." appears.