Hioki MR8740, Instruction Manual

Page: 331 / 424

15.2 Performing Remote Operations on the Instrument (Use an Internet Browser)
319
12
Ch
apter 15
Connection
to a Compute
r
14
15
The instrument can be controlled from a remote location. (This remote operation is mainly intended for
monitoring the screen. If you want more nimble remote operation, use Model 9333 LAN Communicator.)
To open the screen: Click [Remote Control] on list of operations.
The remote control screen is divided into the instrument display section and operation panel.
When you click a button on the operation panel, MR8740/MR8741 Memory
HiCorder performs the same action is if the corresponding key on the unit was
pressed. However, simultaneously activating more than one button is not possible.
The keys and controls on the instrument are active also during remote operation.
Remote Operation
Remote Control Screen
Operation panel
Instrument display
screen
Operation panel
Update screen
Zoom in or out
Set display update speed.
Available settings:
Normal / Slow / Very Slow
When Auto Update is enabled, screen information is sent from the instrument to the
PC in regular intervals to keep the display updated.
Basic Operations
Remote control may not be possible when JRE has not been installed. (
⇒
p.316)
If you will be using key operation, we recommend setting the refresh speed to
[Slow] or [Very Slow].