Operating Precautions
9
Handling Media
• Do not remove the media while it is being accessed by the instrument. Data on
the media could be lost.
• Do not turn off the power to the instrument while the media is being accessed
by the instrument. Data on the media could be lost.
• Do not transport the instrument while a USB flash drive is connected. Damage
could result.
• If damage occurs to the data on the media, we cannot restore or analyze the lost
data. No compensation will be provided, regardless of the type or cause of the
problem or damage.We therefore recommend maintaining a backup of any
important data.
• Be careful to avoid inserting a media backwards or upside-down. The media or
the instrument could be damaged.
• Never insert or eject a media while it is being accessed by the instrument. Data
on the media could be lost.
• Do not operate the instrument at a slanted angle. It may not work properly.
• Do not transport the instrument while a USB memory stick is connected. Dam-
age could result.
• Some USB memory sticks are susceptible to static electricity. Exercise care
when using such products because static electricity could damage the USB
memory stick or cause malfunction of the instrument.
• With some USB devices, the instrument may not start up if power is turned on
while the device is inserted to the USB port. In such a case, turn power on first,
and then insert the USB device. It is recommended to try out operation with a
USB memory stick before starting to use it for actual measurements.
• Peculiar USB memory requiring fingerprint authentication or password cannot be
used.
• When saving or loading data, insert the storage media before selecting it. If the
media is not inserted, the file list display will not appear.
• All media (USB memory) have a limited service life. After extensive use over a
long period, data retention and readout may become stop working. In that
case, replace the card with a new one.
• Automatic saving of data is possible only on USB memory stick media.
• The data can be automatically stored in the USB flash memory; however, it is
not guaranteed to work.
Summary of Contents for MR8740
