manualshive.com logo in svg

Hioki MR8740, Instruction Manual

Share
Download
Hioki MR8740 Instruction Manual Download Page 136

6.3  Moving the Waveform Display Position

124

You can display the waveform position you wish to view immediately by specifying it with the
mouse.

6.3.3 Moving the Position

Procedure

To open the screen:  Right-click and select 

[DISP]

 

→

 

Waveform screen 

→

 

 

Left-click the 

[WAVE]

 

icon

 

→

 WAVE 

settings GUI display

1

Left-click the 

[WAVE]

 icon.

Left-click the 

[WAVE]

 icon on the top right of the Waveform screen.

2

Use the mouse to specify a position on the scroll bar of the
screen.

3

Left-click the mouse.

The selected display position appears on the screen.

Moving the position when 

[Memory Div: On]

 with the Memory

function:

Click the 

[WAVE] 

icon. With no block displayed in the upper part of

the screen, move the position.
(When a block is displayed in the upper part of the screen, the
desired block can be selected and the recorded waveform can be
displayed. (p.134)

Summary of Contents for MR8740









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands