Hioki MR8740-50, Instruction Manual

Page: 153 / 238

147
Configuring the Numerical Calculation Settings
Displaying numerical calculation results
You can check calculation results on the waveform screen.
> [Numeric Calc.]
a
b c
• You can display or hide the screen of the numerical calculation results every time you click [CH
info]
.
• If no periods are found or a calculation is aborted, the character string [ ****** ] appears instead of
a calculation result.
• For channels not specified as a calculation target, the character, [–] appears.
Click [ ] under the [CH Info] toggle switch, and then choose [Calcu Result] from the list (
a
).
To save calculation results after measurement
Refer to “Freely selecting data items to be saved and save files (save icon)” (p. 90).
To change the display width of the calculation result screen
You can change the display width of the calculation results by clicking [–] or [+] (
b
).
You can choose calculation numbers to be displayed by clicking the buttons (
c
).
• You can specify up to four calculation results to be displayed.
• Choose calculation numbers you want to display from the list.
7
Numerical Calculation Function