Hioki MR8740-50, Instruction Manual

Page: 11 / 238

5
Setting Measurement Conditions
1.2 Setting Measurement Conditions
You have to set conditions required for measurement, such as the sampling rate ([Sampling]) and
recording length ([Shot]).
> [Status] > [Condition]
7
1
2
3
4
5
9
6
8
1
Enter a comment in the [Title comment] box.
Number of characters that can be entered: up to 40
2
Click the [Sampling] box, and then choose a sampling rate from the list.
Refer to “Sampling rate setting guideline” (p. 7).
20 MS/s , 10 MS/s , 5 MS/s , 2 MS/s , 1 MS/s ,
500 kS/s , 200 kS/s , 100 kS/s , 50 kS/s , 20 kS/s , 10 kS/s , 5 kS/s , 2 kS/s , 1 kS/s ,
500 S/s , 200 S/s , 100 S/s , 50 S/s , 20 S/s , 10 S/s , 5 S/s , 2 S/s , 1 S/s
When the real-time save is set to [On] , due to the combination of the number of channels to be saved and
save destinations, the maximum sampling rate that can be set varies as follows:
Maximum sampling rate that can be
chosen
Destination to save
Number of channels to be saved Built-in SSD USB flash drive*
12 channels or less 5 MS/s 1 MS/s
33 to 64 channels (SSD)
25 to 64 channels (USB flash drive)
2 MS/s 500 kS/s
13 to 32 channels (SSD)
13 to 24 channels (USB flash drive)
1 MS/s 200 kS/s
65 channels or more 500 kS/s 100 kS/s
(When Model U8991 is installed, double the number of its channels and find the maximum sampling rate.)
*: Only if Model Z4006 USB Drive, a Hioki-designated option, is used, the real-time save operation with the
instrument is guaranteed
1
Measurement Method