Hioki Memory HiCorder MR6000, Instruction Manual, Page: 95 / 392

89
Configuring Module-Specific Settings
Registering arbitrary waveforms in the U8793 Arbitrary Waveform
Generator Unit
This section describes how to register, display, and delete arbitrary waveform data.
> [Channel] > [U8793]
Display Displays the arbitrary waveform data set chosen from among registered data sets.
Tap
to choose or check the registered arbitrary waveform data sets.
Remove
Deletes the chosen arbitrary waveform data set.
When the U8793 contains eight registered waveforms, delete any one of them before
registering a waveform.
Enty Registers the arbitrary waveform in a vacant number (up to eight waveforms).
It will take about 40 s to register a waveform consisting of 250,000 samples.
WAVE  Registers the waveform data the instrument has acquired.
See “To resister the arbitrary waveform using measured data”
(p. 90).
FILE Reads the waveform data from a file and registers it.
See “To resister the arbitrary waveform using a file” (p. 92).
Save Press the SAVE key to save arbitrary waveform data registered in the U8793 as files.
See “Freely choosing data items to be saved and save files (SAVE key)” (p. 109).
Initializing the instrument will not cause loss of registered waveform data.
Advanced Functions
HIOKI MR6000A966-03