Hioki Memory HiCorder MR6000, Instruction Manual, Page: 69 / 392

63
Inverting a Waveform (Invert Function)
3.5 Inverting a Waveform (Invert Function)
You can invert a waveform relative to the X axis. This function can be used for analog channels
only.
Measured data saved in files is that inverted by the invert function.
Example:
• When a signal is inputted with spring-pulling force negative and spring-compressing force
positive; however, you would like to display the results with spring-pulling force positive and
spring-compressing force negative
• When a current sensor is clamped around a wire with its current direction mark mistakenly in the
direction opposite to the current flow
> [Channel]
Tap the [Invert] button to set it to [On] .
This setting is not available for Model 8967 Temp Unit, Model 8970 Freq Unit, and Model 8973
Logic Unit.
Advanced Functions
HIOKI MR6000A966-03