Hioki Memory HiCorder MR6000, Instruction Manual, Page: 52 / 392

46
Generating XY Composite Waveforms (XY Composite)
2.8 Generating XY Composite Waveforms
(XY Composite)
During or after measurement, you can generate XY composite waveforms using waveforms
acquired across user-defined channels.
Up to eight channels can be chosen from among analog channels, real-time calculation channels,
and waveform calculation channels for generating XY composite waveforms.
No waveforms that have been acquired with the measurement method set to [Envelope] can be
used for generating XY composite waveforms.
You can use the sheet setting screen to configure the display format, channels assigned to the X
and Y axes, and the composite range settings.
To generate XY composite waveforms during measurement, you have to configure settings
beforehand.
See “1.4 Configuring the Sheet Settings” (p. 19).
Operation on the waveform screen
Channel selection button
X-axis gauge Y-axis gauge
The X-axis and Y-axis gauges indicate the values of channels of each axis assigned to the chosen
composite channel.
Dragging the waveform screen
Scrolls through displayed waveforms that are being measured or that have already existed.
Pinching in and out the waveform screen
Enlarges and compresses the waveforms.
Tapping the channel selection button
Switching the composite channels to be brought in front of others.
HIOKI MR6000A966-03