manualshive.com logo in svg

Hioki Memory HiCorder MR6000, Instruction Manual, Page: 341 / 392

Share
Download
Hioki Memory HiCorder MR6000 Instruction Manual Download Page 341

335

Operating the Instrument With a Browser Installed in a Computer

Remotely operating the instrument 

1

1 

Click 

[Remote]

 on the menu.

The screen switches to the remote operation screen, and the screen displayed on the instrument appears as it 

is on the browser.

The operation panel buttons conform to the buttons on the instrument. Clicking the screen with a mouse (same 

as tapping the screen of the instrument) allows you to remotely operate the instrument.

2

3

2 

Choose a screen update speed from the 

[Update Speed]

 list box.

3 

To save a screenshot, click 

[Screen Copy]

.

Connecting the Instrument to Computers

HIOKI MR6000A966-03

Summary of Contents for Memory HiCorder MR6000









































































































































































































































































































































































































Reviews:

No comments