Hioki Memory HiCorder MR6000, Instruction Manual, Page: 31 / 392

25
Configuring the Sheet Settings
Generating XY composite waveforms
During or after measurement, you can generate XY composite waveforms using waveform acquired
across user-defined channels.
> [Sheet]
4
1
2
3
1
Tap the [Type] box, and then from the list, select [XY composite waveform] .
2
Tap the [Divide] box, and then from the list, choose an option for the number of screens to
be divided.
XY Single
 ,
XY Dual
,
XY Quad
,
Time se XY Dual
3
Tap the [Range] box, and then from the list, choose an option for a range of waveforms to be
used for generating XY composite waveforms.
Whole  Generates XY composite waveforms using the whole waveforms.
Segment 1
Segment 2
Generates XY composite waveforms using the waveforms between the specified
section cursors.
How to specify section cursors
See “2.2 Specifying the Waveform Range (Section Cursor)” (p. 34).
Measurement Method
HIOKI MR6000A966-03