Hioki Memory HiCorder MR6000, Instruction Manual, Page: 244 / 392

238
Setting FFT Calculation Conditions
FFT calculation advanced settings
You can configure the FFT analysis setting that includes a type, channels, a waveform display
color, and X- and Y-axes.
> [Calculation] > [FFT calculation]
1
3
5
4
6
10
11
2
7
1
Tap the [FFT] button to set it to [On] .
2
Enter a comment in the [Comment] box.
Number of characters that can be entered: up to 40
3
Tap the [Calculation Type] box, and then choose a calculation type from the list.
Off  Does not perform any calculations.
Linear spectrum
(p. 245)
RMS spectrum (p. 247)
Power spectrum (p. 249)
1CH Phase spectrum (p. 250)
Cross power spectrum
(p. 251)
Transfer function (p. 252)
Coherence (p. 253)
2CH Phase spectrum (p. 250)
See “Calculation types and internal calculation formulas” (p. 254).
4
Tap the [Calculation Channel 1] and [Calculation Channel 2] boxes in turn, and then from the
list, choose channels to use for a calculation.
Target: built-in modules, calculations
5
Tap the [Display] button of the FFT calculation results to set it to [On] .
HIOKI MR6000A966-03