Hioki Memory HiCorder MR6000, Instruction Manual, Page: 135 / 392

129
Triggering the Instrument Using Analog Signals (Analog Trigger)
5.6 Triggering the Instrument Using Analog Signals
( Analog Trigger)
This section explains how to configure the analog trigger settings and types of the analog triggers.
> [Trigger] > [Source]
1
1
Tap a trigger source to be set.
The setting dialog box appears.
3
4
2
2
Tap the [Channel] box, and then from the list, choose a channel you want to set a trigger
condition for.
See “Settable channels for each trigger source” (p. 130).
3
Tap the [Type] box, and then choose a trigger type from the list.
Off

, Level , In , Out , Voltage drop , Period-in , Period-out , Glitch
4
Configure each trigger-type-specific setting.
Configuring the
Trigger Settings
HIOKI MR6000A966-03