manualshive.com logo in svg

Hioki Memory HiCorder MR6000, Instruction Manual, Page: 122 / 392

Share
Download
Hioki Memory HiCorder MR6000 Instruction Manual Download Page 122

116

Managing Files

4.4  Managing Files

Opening 

Explorer allows you to manage data saved in storage devices.

Operation available on Explorer

Changing storage 

devices

Storage devices can be changed.

Sorting files

Files on a file list can be sorted based on the chosen basis.

Moving files to a 

folder

Files can be moved to a folder of your choice.

Copying files

Files can be copied to a specified folder. When you choose folders to be copied, the 

chosen folders are copied to the specified folder.

Creating a folder

A new folder can be created.

Renaming a file

A file or folder can be renamed.

Deleting files

Files and folders can be deleted.

Format

A storage device can be formatted.

To open the explorer

1

2

1 

Tap 

[Func]

.

2 

Select 

[Explorer]

.

Explorer appears.

Choose a storage device to be operated.

HIOKI MR6000A966-03

Summary of Contents for Memory HiCorder MR6000









































































































































































































































































































































































































Reviews:

No comments