Hioki LR8450, Instruction Manual

Page: 98 / 310

95
Activating a Trigger at a Set Interval
Unit Measure Channel Trigger Alarm Calculation System
2.6 Activating a Trigger at a Set Interval
Interval triggers
This section describes how to activate a trigger at a set interval.
You need to set repeat recording set to [ON] beforehand.
See “1.2 Setting Measurement Conditions” (p. 10).
> >
1 1
2 2
1
Under [Interval trigger] , select the interval trigger conditions.
If you wish to give priority to the interval trigger, use the [OR] setting. (p. 96)
If you wish to give priority to other triggers, use the
[AND]
setting. (p. 96)
OFF

Does not use the interval trigger.
OR Uses the interval trigger based on OR logic.
AND
Uses the interval trigger based on AND logic.
2
Set the interval for the interval trigger.
DD, HH:MM:SS
The trigger will simultaneously activate when measurement starts. Subsequently, the trigger will activate at
every interval trigger interval.
2
Trigger Function