Hioki LR8450, Instruction Manual

Page: 52 / 310

48
Entering Comments
Channel comments
This section describes how to enter a string of text for each channel. (Up to 40 single-byte
characters)
See “Text entry method” (p. 8).
Channel comments are displayed on the screen when the waveform screen is set to [Wave+Value] .
Channel comments allow you to identify channels when measuring numerous channels.
> >
1 1
1
Select [Comment] with the Left Arrow , Right Arrow , Up Arrow , and Down Arrow keys and
press the ENTER key.
The text entry window will open.
See “Text entry method” (p. 8).
2
Enter text and press the ENTER key.
The entered text will be accepted.
You can use [Comment] on the settings list screen to enter channel comments.
See “1.7 Configuring Channels in a List” (p. 50).