Hioki LR8450, Instruction Manual

Page: 230 / 310

227
Sending Data Using the FTP Client
Unit Measure Channel Trigger Alarm Calculation System
Sending a test file
This section describes how to check whether the instrument can send a file using FTP.
> >
2 2
1 1
1
Press the ENTER key while [FTP data auto send settings...] is selected.
The settings window will open.
The identifiers whose checkboxes are selected under [Filename identifier] will be added to the
filename.
2
Press the ENTER key while [Send test] is selected.
The test file [FTP_TEST.TXT] will be sent to [C:\Intpub\ftproot] .
If you are unable to send the test file, check the instrument's automatic send settings and the
computer’s FTP settings.
If you find no issues when sending the test file, start measurement.
Measured waveform data will be automatically sent to the computer’s FTP server.
9
Communicating with a Computer (PC)