194
Configuring and Establishing a LAN Connection
Configuring LAN settings
To communicate with the instrument over the LAN, configure the following settings:
•
[DHCP]
If
[DHCP]
is set to
[ON]
, the instrument will automatically acquire the IP address and subnet
mask.
OFF
Disables the DHCP function.
ON
Enables the DHCP function.
•
[Host name]
Specify the instrument’s hostname.
String of up to 12 single-byte characters (example:
LOGGER
)
•
[IP address]
Set the instrument’s IP address.
_._._._
(_: 0 to 255) (example:
192.168.1.2
)
•
[Subnet mask]
_._._._
(_: 0 to 255) (example:
255.255.255.0
)
•
[Port number]
Set the number of the TCP/IP port used by the instrument.
The last digit cannot be set as it is used by the instrument’s firmware.
____
(_: 0 to 9) (example:
880X
)
•
[Gateway]
If
[DHCP]
is set to
[ON]
, the gateway will be set automatically.
OFF
,
ON
•
[Gateway IP]
If
[Gateway]
is set to
[ON]
, set the IP address of the device that will serve as the gateway.
_._._._
(_: 0 to 255)
•
[DNS]
Select whether to use DNS.
OFF
,
ON
•
[DNS IP]
If
[DNS]
is set to
[ON]
, set the DNS server’s IP address.
_._._._
(_: 0 to 255)
Summary of Contents for LR8450
