Hioki LR8450, Instruction Manual

Page: 168 / 310

165
Configuring Settings
Unit Measure Channel Trigger Alarm Calculation System
3
Under [ Backlight brightness] , select the backlight brightness.
1
,
2
,
3
 ,
4
,
5
Larger values indicate higher brightness levels.
Lowering the backlight brightness (dimming the backlight) will allow the instrument to operate longer on battery
power.
4
Under [ Language] , select the user interface language.
Press the ENTER key to display a settings window. Configure screen display and keyboard
settings.
Select [OK] after selecting the language to close the window. Select [Cancel] to close the window
without changing any settings.
日本語
(Japanese), English ,
简体中文
(Simplified Chinese)*,
한국어
(Korean)*
*: Available soon.
5
Under [ Waveform background color] , select the background color for the waveform screen.
Dark

, Light
Dark Light
6
Under [ Beep sound] , select whether to beep when a warning or error occurs.
ON

, OFF
7
Under [ Operation error prevention] , select whether to display a confirmation window when
starting and stopping measurement.
ON

Displays a confirmation window when the START key or STOP key is pressed.
Press the ENTER key while [Yes] is selected to start or stop measurement.
OFF Starts measurement immediately when the START key is pressed.
Stops measurement immediately when the
STOP
key is pressed.
When measurement starts, data in the instrument’s internal buffer memory will be deleted, and the instrument
will start to record new data.
Select the [ON] setting to prevent waveform data from being inadvertently deleted.
7
Configuring System Settings