Hioki LR8450, Instruction Manual

Page: 150 / 310

147
Performing Numerical Calculations
Unit Measure Channel Trigger Alarm Calculation System
Configuring numerical calculations
> >
2 2
3 3 4 4
1 1
5 5 6 6 7 7
1
Under [Numerical calculation] , set the numerical calculation function to [ON] .
OFF

, ON
2
Under [Time split calculation] , select the file segmentation method.
Disable

Saves the last numerical calculation results.
Enable
Allows you to set the interval at which to perform the calculation under
[Split time]
.
The calculation will be performed after a start trigger, and the results saved, at the set
interval.
For example, if the segment time is set to 10 min., the calculation will be performed, and the
calculation results saved, every 10 min.
(When [Time split calculation] is set to [Enable] )
Under [Split time] , set the time interval at which to perform the calculation.
0 Days 00:01 to 30 Days 23:59
If
[Time split calculation]
is set to
[Enable]
, calculation results will be saved for each time interval.
Segment time
Start
measurement
Stop
measurement
Under [Split time] , set the time interval at which to
perform the calculation.
Calculation results will be saved for the specified amount
of time.
The value 0 d 0 hr. 0 min. cannot be specified as the
segment time. The value will be automatically changed to
0 d 0 hr. 1 min.
If the format for numerical calculation results in the auto save settings has been set to [OFF] , the
[Time split calculation] setting will not be available.
See “Auto save (real-time save)” (p. 106).
Set the format for numerical calculation results to [Text] .
6
Numerical and W
aveform Calculations