Hioki LR8450, Instruction Manual

Page: 142 / 310

139
Unit Measure Channel Trigger Alarm Calculation System
5
Marking Functionality
This chapter describes how to assign event marks to
waveforms during measurement.
(Up to 1000 marks can be assigned.)
You can also search for event marks and jump to their display
positions.
Event marks can be assigned by means of the following four
methods:
• Pressing the START key during measurement
• Tapping the
[Mark]
button on the screen during
measurement
• Inputting a signal to external control terminal
I/O 1
to
I/O 3
during measurement
• Configuring the event mark setting so that an event mark is
entered responding to alarm
5.1 Assigning Event Marks during Measurement .................... p. 140
5.2 Assigning Event Marks with an External Signal ................ p. 141
5.3 Assigning Event Marks When Alarms Occur ..................... p. 142
5.4 Searching for Event Marks .................................................. p. 143
5.5 Reviewing Events in CSV Data............................................ p. 144
5 Marking Functionality
5
Marking Functionality