Hioki LR8432-20, Instruction Manual

Page: 149 / 238

7.3 Performing Waveform Calculation
141
3
7
C
h
ap
te
r 7
N
u
m
e
ri
cal
/W
avef
orm
C
a
lc
u
lat
ions
Waveform calculation can be selected from Four operations , Sum , Average , Mov-
ing average , or Heat flow rate .
(CHA and CHB can be selected among the channels from CH1 to CH10, those from
P1 to P4, and the calculation channels from W1 to W9 with a channel number that is
smaller than the number of the calculation channel to be set. For example, W1 and
W2 data can be set for
[CHA] and [CHB] for W3.)
If the above formula is set ahead of time, a waveform after calculation can be dis-
played on the waveform screen and the calculation value can be saved during mea-
surement. 10 calculations (W1 to W10) can be performed at a time.
7.3 Performing Waveform Calculation
Waveform calculation cannot be performed after measurement.
Key Operation During Setting
Select the [CH] screen.
1
2
Switch the channel to be set using the
channel key.
Move the cursor to the
item to be set.
Apply
Open the setting op-
tions.
Select the item.