Hioki LR8432-20, Instruction Manual

Page: 140 / 238

7.1 Performing Numerical Calculation
132
Two methods are available for applying calculations, as follows.
Configure numerical calculations before
starting measurement. Calculations are per-
formed automatically after measurement (p.
133).
• The latest calculation value can be checked in
the calculation/numerical value screen
(
[Wave+Calc]
screen).
• Calculation values at a certain time interval can
be saved in a text (CSV) format.
Calculating in real time during
measurement (Auto calculation)
(Setting Screen)
Set Numerical Calculation to [On] ,
and select the calculation types
To save calculation results automatically
(Setting Screen)
Enable Auto Save (p. 115)
Start and finish measuring
Analyze (p. 97)
Configure numerical calculations after
measurement (p. 137).
Calculating After Measuring
(Manual calculation)
End of Measurement
(Setting screen or Waveform screen)
Set Numerical Calculation to [On] ,
and select the calculation types.
(Waveform Screen)
Execute Calculations
Analyze (p. 97)