Hioki LR8431, Instruction Manual

Page: 49 / 204

3.2 Operating Flow Overview
41
3
3
Chapt
er
3 Sett
ing be
fore M
easure
ment
Certain setting items are available on the Waveform screen. Setting details are
the same as for those on the Setting screen.
Measurement Configuration (Waveform Screen)

Specify the recording interval (data acquisition
interval) (p. 42)

Specify the display time base (time per hori-
zontal division) (p. 43)

Enable digital filtering (noise suppression)

(p. 45)
Waveform Screen
Horizontal Axis Settings

Voltage measurement (p. 50)

Temperature measurement (p. 51)

Integration (pulse count) (p. 53)

Revolution measurement (p. 54)

Alarm settings (p. 73)

Setting the display range

Specifying the display position (p. 56)

Specifying upper and lower display limits

(p. 57)

Select the alarm display type (p. 84)

Eject (replace the CF card/USB flash drive
during real-time save operation)(p. 48)

Displaying any point in time (Jump function)

(p. 83)
Waveform Display Settings
Input Channel Settings
About Channel Settings
Pressing the CH / keys selects channel setting and gauge display items.
However, while measurement data is displayed, such changes affect only those
channels selected (by a check mark [
]).