Hioki LR8431, Instruction Manual

Page: 101 / 204

6.2 Using a CF Card/USB flash drive
93
3
6
Chapte
r 6
Sa
ving & Loading Dat
a
To save and reload HiLogger measurement data, use an optional CF card or
an after-market USB flash drive.
6.2 Using a CF Card/USB flash drive
Hioki options PC cards

(includes adapter)
• Model 9727 PC Card 256M
• Model 9728 PC Card 512M
• Model 9729 PC Card 1G
• Model 9830 PC Card 2G
*The Model 9726 PC Card 128M
can also be used.
Important
Use only CF cards sold by Hioki.
Compatibility and performance are not guaran-
teed for CF cards made by other manufactur-
ers. You may be unable to read from or save
data to such cards.
This Memory HiLogger does not require a CF (CompactFlash) adapter.
See 6.5, "Data Management" (p. 105) for details about managing data storage in the card.
• During battery-only operation, data may fail to be stored properly
if battery charge is exhausted while saving. In the worst case,
the CF card could be damaged, so pay appropriate attention to
the discharge state of the battery pack.
• If the Eject button is in the released position, press it in first
before inserting the CF card all the way in. Inserting the CF card
when the Eject button is released may damage the instrument. If
the CF card does not go all the way in, do not force it in. Press
the Eject button once to release it, then press it again and insert
the CF card all the way in.
• Although data can be saved in real time to a USB flash drive, it is
recommended to use a CF card for this purpose due to the supe-
rior data protection offered by that media. Proper operation of
media other than Hioki optional CF cards is not guaranteed.
• USB flash drives with security functionality such as password or
fingerprint authentication cannot be used.