Hioki LR8410-20, Instruction Manual

Page: 58 / 364

2.3 Making Connections
46
Before connecting, be sure to read "Before Use" (p .8), "Handling the
Cords and Cables" (p .9), and "Connection Precautions" (p .15).
For more information about how to connect the wireless logger and clamp sensor connec-
tion cables, see the wireless logger's User Manual.
2.3 Making Connections
Pre-Connection Inspection
Do not use if damage is

present as you could

receive an electric shock.

Replace the damaged items.
Metal Exposed
Is the insulation of the measure-
ment cable to be used damaged, or
is bare metal exposed?
1
No Metal Exposed
2
Peripheral Equipment Inspection
Before using the instrument and measurement units the first time, verify that it operates
normally to ensure that no damage occurred during storage or shipping. If you find any
damage, contact your authorized Hioki distributor or reseller.
To
Turn power off before making connections.
If damage is evident,

request repairs.
Yes
Is damage to the instrument and
measurement units evident?
Instrument Inspection
When turning power on
Does the HIOKI logo appear on the
screen?
No
2
The power cord may be

damaged, or the instru-
ment may be damaged

internally. Request repairs.
Is the Waveform/NumericalWave-
form/Numerical screen or Setting
screen displayed?
(When power is turned on the first
time after purchase, the Setting
NAVI screen should appear.)
No
Yes
The instrument may be

damaged internally.

Request repairs.
Nothing appears,
or the display is
abnormal
Yes
Inspection complete