Hioki LR8410-20, Instruction Manual

Page: 46 / 364

1.3 Names and Functions of Parts, Screen Configurations
34
[CH] Screen
[Conv/Calc] Screen
[Comment] Screen
Enter channel comments (p. 98).
[Setting] Screen
[List] Screen
[Trig & Alm] Screen
[System] Screen
Configure the system environ-
ment (p. 195).
Settings Screens
Operational information
is displayed along the
bottom of the screen.
Make these settings to convert
measured values to arbitrary units
for display (p. 101). Recording criteria (triggering)

and warning sounds can be set

for each channel (p. 127).
Make settings while viewing all

channel settings (p. 101).
Make settings for recording

(p. 68).Set numerical calculation,

auto-saving and reservation.
Make input channel settings while

viewing the monitor display

(p. 72).
[UNIT] Screen
Register measurement units and
wireless loggers.

You can also edit each unit’s ID

name.
The screen switch-
es each time you

press the key.

(8 display types)
Press the left/right

keys to select

between the

Settings screens.
When a tab is select-
ed with the cursor,

press the left/right

cursor keys to select

between the Settings

screens.
Selects a measure-
ment input unit

and its settings.