Hioki LR8410-20, Instruction Manual

Page: 203 / 364

7.3 Waveform Calculations
191
3
Cha
p
te
r 7
Numerical Ca
lcula
tions/W
avef
orm Cal
cula
tions
7
Coefficient a x [CH A] (×, ÷ , +, or -) coefficient b × [CH B] + coefficient c
(CH A and CH B may be any input channels' measurement data, selectable from CH1-1 to 7-15 or
waveform calculation result channels W1 to W29 (reused as inputs, as long as the channel number
is smaller than number of the final calculation result channel). For example, to obtain results on W3,
[CHA] and [CHB] can be set to W1 and W2, respectively.)
The above formula is set up beforehand, calculation result waveforms are displayed on the Wave-
form screen while measuring, and calculated values can be saved. Up to 30 calculation result
waveform channels (W1 to W30) are available at once.
Power calculation settings can also be configured.
d
7.3 Waveform Calculations
Waveform calculations cannot be performed after measurement.
Key Setting Procedure
Select the [CH] Screen.
Move to a setting item.
Apply
Open the setting options
for the item to be set.
Select from the listed

options.
1
2
UNIT selects the input unit and CHAN select
the channel to be set.