Hioki LR8410-20, Instruction Manual

Page: 202 / 364

7.2 Numerical Value Calculation Expressions
190
7.2 Numerical Value Calculation Expressions
Average
Obtains the average value of waveform data.
AVE : Average value
n : Data count
di : Data on channel number i
Peak Value
(P-P)
Obtains the value of the difference (peak-to-peak
value) between maximum and minimum values of
waveform data.
Maximum
Value Obtains the maximum value of waveform
data.
Minimum
Value Obtains the minimum value of waveform
data.
Time to

maximum
value
Acquires the time (s) elapsed from the start of re-
cording to maximum value. When there are two or
more maxima, this value is the first to occur.
Time to

minimum
value
Acquires the time (s) elapsed from the start of re-
cording to minimum value. When there are two or
more minima, this value is the first to occur.
Interval

Calculation
(Auto Calc
only)

(p. 187)
When [Split Save] is enabled ( [On] or [Ref
Time] ), calculation results are saved at the speci-
fied interval.
When [On] :

Set the [Split Length] . Calculation results for the
specified time span are automatically saved.
You cannot set the split time to 0 d 0 h 0 m. If you
attempt to do so, it will be set automatically to 0 d
0 h 1 m.
When [Ref Time] :

Set the [Split time] and [Split Length] . Calcula-
tion results starting from the reference time are au-
tomatically saved for the specified time span.
AVE
1
n
---
di
i 1 =
n

=
Maximum
value
Minimum
value
Peak value
Maximum
value
Minimum
value
Maximum
value
Time to maximum value
Start of Measurement
Time to minimum value
Minimum
value
Start of Measurement
Split Time
Start of
Measurement
End of
Measurement
When
[On]
Reference
Time
Start of
Measurement
End of
Measurement
When

[Ref
Time]
Split
Length