Hioki LR8400-20, Instruction Manual

Page: 79 / 300

3.5 Waveform Display Settings (as needed)
67
3
3
Chapt
e
r
3 Sett
ings
Set the waveform display settings as needed.
These settings can be changed on the Numerical/Waveform screen after measure-
ment (p. 87).
Different display colors can be selected for each input channel waveform.
3.5 Waveform Display Settings (as needed)
The Setting screen cannot be displayed while measuring.
Key Setting Procedure
Select the [CH]
screen.
Move to a setting item.
Apply
Open the setting options
for the item to be set.
Select from the listed op-
tions.
1
2
UNIT selects the input unit and the CHAN se-
lect the channel to be set.
Selecting Waveform Display Color
Select from the waveform display color setting
options.
Setting options:Off (x), 24-color