Hioki LR8400-20, Instruction Manual

Page: 46 / 300

2.3 Connecting the AC Adapter
34
Connect the power cord and the HiLogger to the supplied Model 9418-15 AC
Adapter, then plug the power cord into an outlet. When used with the battery pack
installed, the battery serves as an operating backup supply in case of power failure,
and the AC adapter otherwise has priority.
Before connecting, be sure to read "Using the AC Adapter" (p .9) and
"Handling the Cords and Cables" (p .7).
2.3 Connecting the AC Adapter
• Connect the output plug to the instrument before plugging the power
cord into an outlet. Connecting an energized output plug to the instru-
ment could damage the instrument.
• When connecting an external power supply, connect the output plug to
the instrument before activating the external power supply.
Connect the
power cord to the
inlet socket on
the AC adapter.
Rated supply voltage is 100 to 240 VAC,
and rated supply frequency is 50 or 60 Hz.
1
2
Connect the
output plug of
the AC adapter
to the HiLog-
ger.
Plug the power
cord into the
mains outlet.
3
Power cord
AC adapter