Hioki LR8400-20, Instruction Manual

Page: 115 / 300

5.1 Triggering Measurement Start and Stop
103
3
5
Chapter 5 S
p
ecif
y
ing Crite
ria
for M
easurement
s
Before setting trigger criteria, trigger functions need to be validated.
Enable the Trigger Function
Enable the Trigger Function
1.
Select the trigger to use, and
press
ENTER .
Put the cursor on [Start trig on.] for a start
trigger, or on [Stop trig on.] for a stop trigger,
and press ENTER .
2.
Press it again when the confirma-
tion message appears.
[Cond:Off] appears, and trigger criteria set-
tings are enabled.
When
[Cont:
∗∗
] is displayed, triggering is en-
abled (On).
To disable triggering, set
[Trig Func:Off] on
the [Trig & Alm] screen.
Set trigger criteria
Select the trigger criteria to be applied.
See:
P.104 to P.106
Triggering can be enabled/disabled (On/Off)
and criteria selections can be set on the
[Trig
& Alm] screen.(p. 116)
The [Timming] setting on the [Trig & Alm] screen deter-
mines the effect of triggering, as follows:
• Start recording upon trigger: [Start]
• Stop recording upon trigger: [Stop]
• Alternately start and stop upon trigger: [Start/Stop]
Measuring
T T T T
Start Stop Start / Stop
Key Setting Procedure
Move to a setting item.
Apply
Open the setting options
for the item to be set.
Select from the listed
options.
1
2
Select the [CH] or
[Trig & Alm] Screen.