Hioki LR5092, Instruction Manual

Page: 82 / 148

7.2 Setting the Collector from the LR5000 Utility Program
76
Rec interval
Sets the recording interval.
Start Method
Select the recording start method.
When
[Scheduled Time] is selected, specify the start date and time.
Stop Method
Select the recording stop method.
When
[Scheduled Time (Endless)] or [Scheduled Time (One-Time)] is selected,
the date and time need to be set.
Rec Mode
Select the recording mode.
See:
Statistical recording results in shorter logger battery life.
1/2/5/10/15/20/30 sec., 1/2 /5/10/15/20/30/60 min (1day: for the LR5061 only)
Setting Item
Setting Description
Button Operation Starts recording by pressing the button on the logger.
Start After Sent Starts recording by pressing the [Send Settings] button.
Scheduled Time Starts recording at the scheduled time after pressing the [Send Settings] button.
Valid setting time
range
01/01/2010, 00:00 to 12/31/2039, 23:59
When the
[Scheduled Time]
start method is enabled, the [REC] indica-
tor on the logger display blinks until the specified start time.
Setting Item Setting Description
Button Operation
(endless)
Stops recording by pressing the button on the logger.
The oldest data is overwritten when memory is full.
Button Operation
(one-time)
Stops recording by pressing the button on the logger.
Recording also stops when memory becomes full.
Scheduled Time

(Endless)
Stops recording at the scheduled time.
The oldest data is overwritten when memory is full.
Scheduled Time

(One-Time)
Stops recording at the scheduled time.
Recording also stops when memory becomes full.
Hold Data at Sched-
uled Time
Specify when setting [Scheduled Time (Endless)] .
Select this check box to record the data at the scheduled time and stop recording.
Setting Item Setting Description
Instantaneous The instantaneous value is recorded at each recording interval.
Statistical
Measurements are taken once per second, and instantaneous, maximum, mini-
mum, and average values are recorded at each recording interval. (Up to
15,000 data values can be recorded.)
Statistical recording is not available when the recording interval is set to
1 second.