Hioki LR5092, Instruction Manual

Page: 30 / 148

3.2 Settings List
24
The following shows the options that can be selected for each setting that can be
made with the collector.
Settings and Options (Collector)
Logger Type
LR5001
(Initial Setting)
/ LR5011 / LR5021 / LR5031 / LR5041 /
LR5042 / LR5043 / LR5051 / LR5061
Rec Interval
1
(Initial Setting)
/ 2 / 5 / 10 / 15 / 20 / 30 sec. / 1 / 2 / 5 / 10 / 15
/ 20 / 30 / 60 min /1 day*
*: LR5061 only
Rec start time
Button operation
(Initial Setting)
/ Scheduled time
*
/ Start After
Sent
*: Set a date and time.
See:
"Recording Start/Stop Method" (p.25)
Rec Stop Method
Button (Endless)
(Initial Setting)
/ Button (Once)/Sched. (End-
less)
*
/ Sched. (Once)
*
*: Set a date and time.
See:
"Recording Start/Stop Method" (p.25)
Stop Time Data Include
(Initial Setting)
/ Do Not Include
Recording Mode Instantaneous
(Initial Setting)
/ Statistical (STAT)
Comment Settings
No
(Initial Setting)
/ Yes
Note: Comment text is not settable.
Scaling
OFF
(Initial Setting)
/ y=Ax+B
*1
/ 2 Points Setting
*2
*1: Also set the values of A and B
*2: Also set the values of each point.
Decimal Point
Not Fixed
(Initial Setting)
/0 digit/1 digit/2 digits/3 digits
Unit Do Not Send
(Initial Setting)
/ Send
Alarm
OFF
(Initial Setting)
/ ON
*
*: Set the upper and lower limit values.
Power Saving
Auto Off
(Initial Setting)
/ Always On
Range
(Only when connected to LR5021
and LR5051)
LR5021: 200 / 800

C
(Initial Setting)
LR5051: 500 mA
(Initial Setting)
/ 5 / 50 / 500 / 1000 A
Preheat
(Only when connected to LR5041,
LR5042, and LR5043)
OFF
(Initial Setting)
/ 0.5 / 1 / 2 / 5 / 10 / 30 / 60 sec.
Filter
(Only when connected to LR5051
and LR5061)
OFF
(Initial Setting)
/ ON
A check mark is added to the set item.