Hioki IR3455, Instruction Manual

Page: 142 / 184

6.4 Communicating with PC
136
Data saved in the memory may be downloaded to a PC and
the instrument settings may be changed using a PC.
• The data analysis software for 3455 (PC software) must
be installed on the PC.
• Insulation resistance measurement, leakage current mea-
surement, or voltage measurement cannot be performed
while the instrument is communicating with a PC.
• Transmits memory data to a PC from the instru-
ment.
• Displays received data and logging records,
and makes graphs of step voltage test data.
• Creates/prints out reports.
• Edits the settings of the instrument on a PC.
• Saves the data (CSV format)
• Copies and pastes the graph
• Saves the report in RTF format (non-
Windows8/Windows 10-compliant)
• Date and time
• PI Interval
• Voltage application time for step voltage test
6.4 Communicating with PC
What is it used for?
Used to make a table or graph of the
data stored in the memory or create
a report.
Recommended System Requirements
OS
Windows XP/Windows Vista
®
(32-bit)
Windows 7/Windows 8/Windows 10
(32-bit/64-bit)
CPU : Pentium III, 500 MHz or faster
Display : 1024×768 resolution monitor,
32-bit color recommended
Memory : 128 MB of memory or more
HDD space Min. 30 MB free disk space
Interface USB Ver2.0 (full speed)
Connectable to one IR3455 unit.
Functions of Data Analysis Software
for 3455
Settings Editable on PC