Hioki IM9202, Instruction Manual

Page: 7 / 32

5
Overview
Overview
The device is the test fixture to be used by connecting to the impedance analyzer of Hioki.
It performs two-terminal measurement of lead components and SMDs.
Measurable DUT size
Lead components
Axial
A
B
C
A Lead interval
(Component body length)
1 mm to 25 mm
B Lead length 2 mm to 10 mm
C Height to lead* 1 2.5 mm or shorter
Lead wire diameter 0.5 mm to 2 mm
Radial
D
E
D Lead interval 2 mm to 26 mm
E Lead length* 1 2 mm or longer
Lead wire diameter 0.5 mm to 2 mm
SMD*
2
H
F
G
F Component length 1.6 mm to 23 mm
G Component width 0.8 mm or longer
H Component height 0.65 mm or longer
Supported SMD size: EIA0603 (JIS1608) or larger
*1: The component’s H-side lead must not make contact with the fixture’s L-side electrode.
*2: The electrode on the bottom surface of the H side of the component must not make contact with the fixture’s
L-side electrode.
HIOKI IM9202A961-00