Hioki IM7580, Instruction Manual

Page: 247 / 340

239
Overview
11
Using USB Flash Drive
11.1 Overview
You can save measured values and instrument settings to a USB flash drive. You can also load the
saved data.
Saving data
You can save data from this instrument to a USB flash drive.
• Measured values (text format, binary format)
• Measurement screen
• Memory data
• Instrument settings
• Instrument settings and panel settings
Reading data
You can load data from a USB flash drive to this instrument.
• Instrument settings
• Instrument settings, panel settings and measured values (binary
format)
File operation
• You can format (initialize) a USB flash drive. (p. 265)
• You can create a folder. (p. 267)
• You can change a file name or folder name. (p. 268)
• You can delete a file or folder. (p. 270)
Specifications of compatible USB flash drives
Connector USB type A connector
Electrical specifications USB2.0
Power supply Maximum 500 mA
No. of ports 1
Compatible USB device USB Mass Storage Class
CAUTION
• Hioki cannot recover or analyze data from damaged or faulty storage media. We cannot
compensate for such data loss, regardless of the contents or cause of the failure or damage.
We recommend you to make a backup of all important data in a computer or other devices.
• When transporting this instrument, remove the USB flash drive. There is a possibility that
this instrument or the media could be damaged.
• Some USB flash drives are easily affected by static electricity. Handle the USB flash
drive with care as there is a possibility of the drive getting damaged or the instrument
malfunctioning due to static electricity.
11 Using USB Flash Drive
11
Using
USB
Flash
Drive