Hioki IM7580, Instruction Manual

Page: 188 / 340

180
Common Functions (LCR Mode, ANALYZER Mode)
7.3 Common Functions (LCR Mode, ANALYZER
Mode)
These settings are common for LCR mode and ANALYZER mode.
These settings provide the same conditions to both modes.
7.3.1 Saving Measurement Results (Memory Function)
The measurement results can be saved in the instrument (Up to 32,000 items for LCR, and 100 sweeps
for ANALYZER).
The saved measurement results can be saved to a USB flash drive.
See “11.4.4 Saving Memory Data” (p. 258).
Saved data can also be acquired using a communication command.
The items saved to the memory are in accordance with the
:MEASure:VALid
setting. For details on
how to acquire the saved measurement results or how to set
:MEASure:VALid
, refer to LCR Application
Disk (Communication Commands).
1
2
3
1
Press [SETUP] .
2
Press [COMMON] tab.
Press [ADVANCED] tab for the ANALYZER mode.
3
Press [MEMORY] .
4
The numeric keypad can be used for input.
4
Set the number of measurement results to save
with

/

.
Settable range 1 to 32,000 (LCR mode)
100 fixed (ANALYZER mode)
Go to the next page.