Hioki IM7580, Instruction Manual

Page: 114 / 340

106
Setting the Cursor
4.6.2 Setting Cursor Move
Select movable cursors when the measurement screen is displayed.
Moving cursors allows you to check the measured value of the cursor position.
This can only be set when [A&B] is selected for the display cursor setting.
1
4
3 2
1
Press [CURSOR

] .
2
Press [MOVE] .
3
Select the cursor to move in the screen.
[A]
Moves cursor A.
[B] Moves cursor B.
4
Press [EXIT] .
5
Measured value of
cursor A
Measured value of
cursor B
The cursor can be moved to any arbitrary
position on the screen by touching the graphical
display screen.
5
Move the cursor.
Press and hold the key to continuously move the cursor.
[

]
Moves the cursor to the left by ten points.
[

] Moves the cursor to the left by one point.
[

] Moves the cursor to the right by one point.
[

]
Moves the cursor to the right by ten points.