Hioki IM3533, Instruction Manual

Page: 279 / 400

10.3 Self Checks (Self Diagnosis)
271
10
Chapter 1
0 Setting th
e SYST
E
M
Check whether an output signal is output normally from the EXT I/O, and whether an input signal is read nor-
mally.
I/O Test
You can perform the I/O test in mode, mode, or mode.
LCR Measurement Screen
1
Self Checks
Procedure
Press .
2
Self Checks
3
I/O Test
To perform an input signal test:
The signal line name of the input signal
being input (LOW) is displayed in the input
signal test window.
To perform an output signal test:
Press the button with the name of the signal
for which you want to check the output.
To end the test:
Press to close the setting screen.