Hioki FT6031-50, Instruction Manual

Page: 69 / 98

63
Wireless Communications Function (GENNECT Cross)
3.8 Wireless Communications Function
(GENNECT Cross)
When the wireless communications function is enabled, you can
review measurement data and create measurement reports on
mobile devices.
For more information about this functionality, see “GENNECT Cross
Official Website” (application software, free of charge).
GENNECT Cross Official Website
https://gennect.net/en/cross/index
Flashes:
Communicating
Lights up:
Wireless function on
Lights off:
Wireless function off
To toggle the wireless
communications function on
and off, press and hold the
Fn button and the COMP
button for at least 1 s.
1
Connect the Z3210 Wireless
Adapter (option) to the
instrument. (p. 29)
2
Install the GENNECT Cross on
your mobile device.
3
Turn on the instrument.
4
Press and hold the Fn
button and the COMP button
simultaneously for at least
1 s to enable the wireless
communications function.
When the wireless communications
function is on, will flash on the
display.
5
Launch the GENNECT Cross
and pair it with the instrument.
6
Select the measurement
function and start
measurement.
HIOKI FT6031B961-00