Hioki FT6031-50, Instruction Manual

Page: 43 / 98

37
Setting Up Comparator (PASS/FAIL Test)
How to set up comparator
1
2,3
1
Press the 3P/2P button to set
to (3 -pole method),
or (2-pole method) .
2
Press the COMP button.
The indicator blinks, and the
resistance for the comparison reference
appears.
3
Press the COMP button again
and then choose a comparison
reference.
If there is no operation for approx. 2 s after
the desired comparison reference has
been chosen, the comparator is enabled
and the indicator appears in the
display.
The comparator setting is saved even after the power is turned off.
How to disable comparator
1
Press the COMP button while the comparator has been
enabled.
The indicator blinks.
2
Press the COMP button several times until the OFF
indicator appears on the display.
The comparator will be disabled if no button is pressed for about 2 s after
the OFF indicator appears on the display.
HIOKI FT6031B961-00